Our major brands are carried by a network of 40 independent dealers in both Northern and Republic of Ireland.






Feel Free To contact Us
Farmhand Works For the Farmer and we're committed to the farming families of Ireland.

01 - 812 9700


Damastown Rise, Damastown Industrial Park, Dublin 15

01 - 812 9700

Damastown Industrial Park, Dublin 15

Farmhand.ie / Quicke  / Alo Implements / Lifting Implements

Lifting Implements

Fork assemblies, bale assemblies, grip attachments, lifts – with our lifting implements you’re assured the best possible durability, user benefits and productivity.

Implements have a choice of hooks for use with most brands of loaders

Different implements in size and application to satisfy all requirements

Highest quality steel, bearing, rams etc used throughout

Contact Us to find out more

implements-logoMaximize your loader, and choose your implement

We’ve the finest collection of Alo Implements here at Farmhand.ie. Choose your implement below, and maximize the use of your loader.

Hydraulic pallet fork

Our hydraulic pallet forks are a productivity enhancing option which is simple to retrofit. This solution enables perfect sight from inside the cab, to position the exact required distance between the pallet forks. The result, of course, is that all pallet fork work can be carried out much more comfortably and efficiently. Suitable for all our ISO pallet fork frames manufactured since December 2012.

Hydraulic pallet fork
Weight (kg/ibs)73/360
Weight assembled (kg/ibs)169-181/372-398

Pallet Forks

The upper profile is made in one piece. This profile with holes for lateral adjustment provides robust securing of the forks. The load is distributed over a large area thanks to the wide load-bearing surfaces of the forks. With this special design, breaks in the arm are avoided and you get to operate a very stable fork that does not “dangle”. The forks are naturally approved with a large safety margin.

Pallet Forks1,000 kg1,600 kg2,500 kg
Weight155/163 kg175/187 kg217 kg
Max.load1,000 kg1,600 kg2,500 kg
Width140 cm140 cm140 cm
Fork length97/122 cm97/122cm122 cm
Fork height94 cm94 cm94 cm
Fork typeforgingsforgingsforgings

Big Bag Lifter

The height of the hook above the ground is normally the same as when the bottom of the large bags is level with the lowest point of the front loader when the bags are hanging from the big bag lifter. Note the practical benefit of having the hook bent to the side. The hook can easily be seen from the driver’s seat.

Big Bag Lifter
Weight118 kg
Max. load800 kg
Width120 cm
Height170 cm

Log Grab Attachement

ikon-selectofixSuitable for 1,000 kg, 1,600 kg and 2,500 kg fork kits.



Log Grab Attachement
Weight85 kg

Your choice of implement hooks

Quicke does not only give you the largest range of implements. Our implements also have a choice of hooks for use with most brands of loaders.

Implement hooks suitable for Quicke series Q, Trima with
W-frame and other loader brands with Euro implement carriers.
Suitable for Quicke Combi mount, Trima/Bergsjö with SMS- mount, Kellve/Vreten/Howard and any loader with SMS implement carrier.
C: ÅLö TypE 3
Suitable for wholly hydraulic loaders previous to Quicke Series Q. Some implements will also fit loaders with the large and the
small implement carrier from BM.

ikon-selectofix SELECTO FIX*

Save time and avoid problems.

Selecto Fix is a very good aid if the front loader has an additional third or a fourth function. With a simple movement, the implement hydraulics is coupled, easily and without any problems, even when the system is pressurized. Your work is resumed within seconds. The flat face blocks are easy to clean, reducing the risk of dirt finding its way into the tractor’s hydraulic system.


View Brochure

Click here to view or download the brochure.

View Quicke Loaders

Click here to view Quicke Loaders.

View Product Page

Click here to view the full product page on the manufacturer's website.