logo
Our major brands are carried by a network of 40 independent dealers in both Northern and Republic of Ireland.

Krone

Amazone

Quicke

APV

Zuidberg

Feel Free To contact Us
Farmhand Works For the Farmer and we're committed to the farming families of Ireland.

01 - 812 9700

info@farmhand.ie

Damastown Rise, Damastown Industrial Park, Dublin 15

01 - 812 9700

Damastown Industrial Park, Dublin 15

Top
Farmhand.ie / Quicke  / Alo Implements / Bale Implements for Telehandlers

Bale Implements

With our broad range you’re guaranteed to find the baling implements to suit your business and best way of working.

Implements have a choice of hooks for use with most brands of loaders

Different implements in size and application to satisfy all requirements

Highest quality steel, bearing, rams etc used throughout

Contact Us to find out more

Topgrip

The new Topgrip proposes a unique way of handling round or square bales. The Arm extends over the bale and clamps the bale towards the back frame to pull the bale away from the stack. This is a unique action that is perfect for the customer who re-handles wrapped square or round bales that are stacked closely together. The Arm negotiates with the bale for the best way to the back of the bale with the weight of the arm instead of hydraulic force. This prevents any damage to the back of the bale. The arm is rounded without welding to reduce any sharp parts that could rip plastic.

Max Closed75 – 103 cm
Weight251 kg

Multi Bale

The MultiBale Handler is designed to be able to lift many different bales and at the same time support the bale. The frame uses 100x100mm wide box section to support the tines. The upper 3 tines are Conus 2 tines at a length of 1100 mm and the bottom tines are Conus 1 and 810 mm long. The reason to have small tines on the lower bar is to support the bottom bale whilst the larger tines support most of the bale in the middle of the bale. This prevents damage to the wrapping of the bale.

 

Multi Bale220
Tines Conus 14
Tines Conus 23
Width, cm220
Height, cm177 – 227
Weight, kg210

Flexigrip

Storing bales upright on top of each other reduces the risk of air and moisture entering the bales. The Flexigrip arms are mounted on heavy duty hinges that have replaceable bushings. You can lock either the left or the right implement arm, but there is still some movement and this makes it possible to stack bales tightly without damaging the plastic wrapping round the bale.

The implement arms are also designed in such a way that it is easy to reverse away from the bale and this is an advantage when bales have to be stacked tightly. The uniquely curved and rounded shapes as well as the 90 mm tubes contribute greatly to the very careful handling of both lying and standing bales. Of special note are the long, curved tubes, formed out of one piece, without any sharp edges or welded joints. The upper extension to the tube is a special feature for Ålö and it gives improved support when handling lying bales cutting edge.

Flexigrip160 200
For bale sizes, min-max, cm120-160150-200
Weight, kg262287

Quadrogrip

Quadrogrip, probably the best implement on the market for handling of round and square bales. The implement arms are mounted on 350 mm wide, extremely stable sliding plates, which move along the main frame. You can lock either the left or the right arm and this will help when stacking. The sliding runners are serviceable and manufactured in high-quality polyethylene and do not require lubrication. The sliding surfaces are vertical to stop the dirt from sticking. The result is reduced friction, silent movements, minimal wear and longer service life.

Quadrogrip200
Total width, cm235
Bale size, cm60-200
Arm length, cm130
Weight, kg433

RSB 1200

The RSB 1200 is a bale grab that can be used to grab up to 2 round bales or up to 3 square bales depending on the weight.

The side arms have synchronized movement for optimum bale grabbing. The bale is squeezed from both sides and therefore prevents tearing of net or damage to string.

The bottom tines support bales while traveling along uneven ground.

Hooks are bolted to the implement that create flexibility for the end user, changing between hook types becomes cheaper and easier.

RSB1200
No. Curved Tines8
No. Straight Tines2
Weight, kg450

Your choice of Attachment Hooks

Beside our large Original Implement sortiment we also offer you a big selection of Attachment Systems for different Tool Carriers for Front loaders. Telehandlers and Wheeled loaders.

ikon-selectofix SELECTO FIX*

Save time and avoid problems.

Selecto Fix is a very good aid if the front loader has an additional third or a fourth function. With a simple movement, the implement hydraulics is coupled, easily and without any problems, even when the system is pressurized. Your work is resumed within seconds. The flat face blocks are easy to clean, reducing the risk of dirt finding its way into the tractor’s hydraulic system.

SelectoFix

View Brochure

Click here to view or download the brochure.

View Quicke Loaders

Click here to view Quicke Loaders.

View Product Page

Click here to view the full product page on the manufacturer's website.